SKU:1315910
- Ultra-slim active inline preamp that fits between your microphone and mic preamp
- Provides a massive +28dB clean, transparent gain for all your dynamic and passive ribbon microphones
- Perfect for podcasting, recording or live sound
- Gold-plated XLR CONNECTORS
Full description
Some microphones need a LOT of gain - and not all preamps are up to the challenge.
The DM1 DYNAMITE is an ultra-slim active inline preamplifier that fits between your mic and mic pre, providing +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording or live sound.
With a sophisticated class-A design and specially selected high-quality FETs, the DM1 has far lower output impedance and far less noise than anything else on the market.
In addition, the gain is always constant + 28dB regardless of the connected load thanks to its dedicated buffer amplifier.
DM1 requires 48V phantom power.
+28dB CLEAN, CONSISTENT DISTORTION, INDEPENDENT OF LOAD
- designed for neutral, balanced sound quality
- the perfect way to boost the signal from a passive microphone
- gain remains consistent regardless of the connected load
- provides a significantly improved level to your microphone preamplifier for proper amplification
SOPHISTICATED CLASS A ELECTRONICS
- state-of-the-art electronics and high-quality FETs provide extremely low noise
- transformerless design for pristine sound quality
- produces the lowest noise in its class
DEDICATED OUTPUT BUFFER AMPLIFIER
- provides +28dB output independent of load impedance or cable length
- extremely low output impedance
- drives long cable runs and can reduce susceptibility to RF interference, hum and hum
FORGED, RODSIST ALL METAL HOUSING WITH PREMIUM FINISH
- effective rejection of any electrical interference and noise
- high-quality finish ensures a beautiful appearance for many years
- slim design allows for easy placement in the studio or on stage
Gold-plated XLR CONNECTORS
- for lossless and reliable signal connection
Video
Specifications
Frequency range: 10 Hz - 120,000 Hz (-0.3 dB)
Gain: 28 dB (load 1 kOhm)
Max. output level (0.5% THD): 8.3 dBV (2.6 V)
Output noise level: 9 μV (JIS-A)
Power supply: 48 volts according to IEC 61938
Electrical impedance: 135 Ohm
Recommended load impedance: >1k ohm
Current consumption: 3.0 mA
Connection: 3-pin male/female XLR connector
Dimensions: Diameter: 19 mm Length: 95.5 mm
Weight: 80 g
Couldn't load pickup availability
- Ultra-slim active inline preamp that fits between your microphone and mic preamp
- Provides a massive +28dB clean, transparent gain for all your dynamic and passive ribbon microphones
- Perfect for podcasting, recording or live sound
- Gold-plated XLR CONNECTORS
Full description
Some microphones need a LOT of gain - and not all preamps are up to the challenge.
The DM1 DYNAMITE is an ultra-slim active inline preamplifier that fits between your mic and mic pre, providing +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording or live sound.
With a sophisticated class-A design and specially selected high-quality FETs, the DM1 has far lower output impedance and far less noise than anything else on the market.
In addition, the gain is always constant + 28dB regardless of the connected load thanks to its dedicated buffer amplifier.
DM1 requires 48V phantom power.
+28dB CLEAN, CONSISTENT DISTORTION, INDEPENDENT OF LOAD
- designed for neutral, balanced sound quality
- the perfect way to boost the signal from a passive microphone
- gain remains consistent regardless of the connected load
- provides a significantly improved level to your microphone preamplifier for proper amplification
SOPHISTICATED CLASS A ELECTRONICS
- state-of-the-art electronics and high-quality FETs provide extremely low noise
- transformerless design for pristine sound quality
- produces the lowest noise in its class
DEDICATED OUTPUT BUFFER AMPLIFIER
- provides +28dB output independent of load impedance or cable length
- extremely low output impedance
- drives long cable runs and can reduce susceptibility to RF interference, hum and hum
FORGED, RODSIST ALL METAL HOUSING WITH PREMIUM FINISH
- effective rejection of any electrical interference and noise
- high-quality finish ensures a beautiful appearance for many years
- slim design allows for easy placement in the studio or on stage
Gold-plated XLR CONNECTORS
- for lossless and reliable signal connection
Video
Specifications
Frequency range: 10 Hz - 120,000 Hz (-0.3 dB)
Gain: 28 dB (load 1 kOhm)
Max. output level (0.5% THD): 8.3 dBV (2.6 V)
Output noise level: 9 μV (JIS-A)
Power supply: 48 volts according to IEC 61938
Electrical impedance: 135 Ohm
Recommended load impedance: >1k ohm
Current consumption: 3.0 mA
Connection: 3-pin male/female XLR connector
Dimensions: Diameter: 19 mm Length: 95.5 mm
Weight: 80 g